# # GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # URL:http://www.FreeBSD.ORG/ # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: GENERIC,v 1.125 1998/10/16 01:30:11 obrien Exp $ machine "i386" #cpu "I386_CPU" #cpu "I486_CPU" #cpu "I586_CPU" cpu "I686_CPU" ident "Daemon2" maxusers 32 options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options MFS_ROOT #MFS usable as root device, "MFS" req'ed options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, "NFS" req'ed options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=10000 #Be pessimistic about Joe SCSI device options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor config kernel root on wd0 controller isa0 controller eisa0 controller pci0 controller pnp0 controller usb0 controller uhci0 controller ohci0 device uhub0 device ugen0 device ulpt0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 #disk fd1 at fdc0 drive 1 # Unless you know very well what you're doing, leave ft0 at drive 2, or # remove the line entirely if you don't need it. Trying to configure # it on another unit might cause surprises, see PR kern/7176. #tape ft0 at fdc0 drive 2 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 #disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr #disk wd2 at wdc1 drive 0 disk wd1 at wdc1 drive 0 #disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM #device wcd0 #IDE CD-ROM device wfd0 #IDE Floppy (e.g. LS-120) # A single entry for any of these controllers (ncr, ahb, ahc, amd) is # sufficient for any number of installed devices. #controller ncr0 #controller amd0 #controller ahb0 controller ahc0 #controller isp0 # This controller offers a number of configuration options, too many to # document here - see the LINT file in this directory and look up the # dpt0 entry there for much fuller documentation on this. #controller dpt0 #controller adv0 at isa? port ? cam irq ? #controller adw0 #controller bt0 at isa? port ? cam irq ? #controller aha0 at isa? port ? cam irq ? #controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr #controller aic0 at isa? port 0x340 bio irq 11 vector aicintr #controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr #controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr controller scbus0 device da0 device sa0 device pass0 device cd0 #Only need one of these, the code dynamically grows device od0 #device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr #device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr #controller matcd0 at isa? port 0x230 bio #device scd0 at isa? port 0x230 bio # syscons is the default console driver, resembling an SCO console #device sc0 at isa? port "IO_KBD" conflicts tty irq 1 vector scintr device sc0 at isa? tty # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" conflicts tty irq 1 vector pcrint options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std device npx0 at isa? port "IO_NPX" irq 13 vector npxintr # # Laptop support (see LINT for more options) # device apm0 at isa? disable flags 0x31 # Advanced Power Management # PCCARD (PCMCIA) support pseudo-device card 1 controller card0 device pcic0 at isa? port 0x3e0 irq 10 vector pcicintr #device pcic0 at isa? port 0x3e0 vector pcicintr #device pcic0 at card? device pcic1 at card? #device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4 vector siointr device sio0 at isa? port 0x3f8 tty irq 4 vector siointr #device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device sio1 at isa? port 0x2f8 tty irq 3 vector siointr #device sio2 at isa? disable port "IO_COM3" tty irq 5 vector siointr device sio2 at isa? port 0x3e8 tty irq 11 vector siointr #device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr device sio3 #device lpt0 at isa? port? tty irq 7 vector lptintra # Parallel port #device ppc0 at isa? port? flags 0x40 net irq 7 #controller ppbus0 #device lpt0 at ppbus? #device plip0 at ppbus? #device ppi0 at ppbus? #controller vpo0 at ppbus? # atkbdc0 controlls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD tty device atkbd0 at isa? tty irq 1 device psm0 at isa? tty irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device de0 #device fxp0 #device tl0 #device tx0 #device vx0 #device xl0 #device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 vector edintr #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 vector ieintr #device ep0 at isa? port 0x300 net irq 10 vector epintr #device ex0 at isa? port? net irq? vector exintr #device fe0 at isa? port 0x300 net irq ? vector feintr #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr #device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr #device ze0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zeintr #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr #device cs0 at isa? port 0x300 net irq ? vector csintr pseudo-device loop pseudo-device ether pseudo-device sl 1 pseudo-device ppp 2 pseudo-device tun 2 pseudo-device pty 16 pseudo-device gzip # Exec gzipped a.out's # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory. # options SYSVSHM options SYSVSEM options SYSVMSG # The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be # aware of the legal and administrative consequences of enabling this # option. The number of devices determines the maximum number of # simultaneous BPF clients programs runnable. pseudo-device bpfilter 4 #Berkeley packet filter controller smbus0 device smb0 at smbus? controller iicbus0 controller iicbb0 device ic0 at iicbus? device iic0 at iicbus? device iicsmb0 at iicbus? device bktr0 options USER_LDT #allow user-level control of i386 ldt options OVERRIDE_CARD=4 options OVERRIDE_TUNER=4 options DEFAULT_CHNLSET=5 #controller snd0 #device pcm0 at isa? port ? tty irq 9 drq 1 flags 0x0 vector pcmintr #device pcm0 at isa ? port? tty irq 9 drq 1 vector pcmintr #device pcm1 at isa ? port? tty irq 7 drq 1 vector pcmintr #device pas0 at isa? port 0x388 irq 10 drq 6 vector pasintr #device sb0 at isa? port 0x220 irq 9 drq 1 vector sbintr #device sbxvi0 at isa? drq 5 #device sbmidi0 at isa? port 0x330 #device awe0 at isa? port 0x620 #device gus0 at isa? port 0x220 irq 9 drq 1 vector gusintr #device gus1 at isa? port 0x220 irq 7 drq 1 vector gusintr #options GUS_DMA2 #options GUS_DMA=1 #options GUS_IRQ=9 #device pca0 at isa? port IO_TIMER1 tty